These are an upgrade for the Ottsix TKO-10 axle housing that benefit the rig in several ways. TKO-10 XR Mod Beef Tubes allow you to install Axial Wraith/XR10 c-hubs and knuckles along with XR10 universals to obtain up to 70 degrees of steering. They add minimal weight. They also "Beef" up the axle housing itself to help keep from snapping the housing in half. Another benefit is that they give you a solid metal mount for the c-hub screws, instead of the stock plastic that normally holds the c-hub screws and strips out easily.
They will work in both Version 1 and Version 2 front and rear axles.
Adds 1.0 ounces of weight. Great for U4 RC racers!
You will receive two TKO-10 XR Mod Beef Tubes and two beauty rings (enough for one axle).
Team KNK Hardware is included! (Four 2.5x12mm screws for the truss mounting holes are provided. DO NOT use the screws provided by Ottsix as they will not fit the threaded holes in the Tubes!!!)
This wide version allows you to keep the stock XR10 track width and will widen your TKO-10 axle housing by 1/2" per side.