TKO-10 XR Mod Beef Tubes - Narrow - Brass

Continue Shopping or View Cart

These are an upgrade for the stock Ottsix TKO-10 V1 & V2 axle housing that benefit the rig in several ways. TKO-10 XR Mod Beef Tubes allow you to install Axial Wraith/XR10 c-hubs and knuckles along with XR10 universals to obtain up to 70 degrees of steering. They add weight down low to help the center of gravity of your rig, enabling you to run less rotating weight in the tires. They also "Beef" up the axle housing itself to help keep from snapping the housing in half. Another benefit is that they give you a solid metal mount for the c-hub screws, instead of the stock plastic that normally holds the c-hub screws and strips out easily. 

They will work in both the front and rear Version 1 and Version 2 axles.

You will receive two TKO-10 XR Mod Beef Tubes (enough for one axle).


Tube weight = 2.5 o.z. per set

Team KNK Hardware is included! 
(Four 2.5x12mm screws for the truss mounting holes are provided. DO NOT use the screws provided by Ottsix as they will not fit the threaded holes in the Tubes!!!)

This narrow version allows you to keep the stock TKO-10 track width.

SuperShafty Newsletter